METAL PRINTING BLANKETS

          FB 'Victoria' Specialist Metal Printing Blanket

          A fibreglass blanket for the tin printing industry. Made as a carcass, primed, punched, coated by the customer with gelatine, this product was developed for metal decorating for one of the world's largest box manufacturers. The advantages are:
          • Less rubber content so reducing blistering.
          • Significantly increased tensile strength from the heavy fibreglass fabric.
          • Improved fabric adhesion.
          • Ready primed, ready to use carcass, punched to specification.

          Technical Information

          The breaking load of the carcass has been determined at a jaw speed of 50mm/minute using 200mm x 50mm strip:
          Warp (Machine direction)4839 Newtons (1090 lbs/sq.in.)
          Weft (Cross machine direction)4177 Newtons (940 lbs/sq.in.)

          [ Go Back | Home Page | Information | Clients & Products | Contact Us ]